How to Use Calibre with Your Xteink (CrossPoint Plugin Guide)

Short answer

Calibre works great with an Xteink. Use it to organise your library and convert DRM-free books to EPUB. Then either copy them to the microSD card (any firmware), or install CrossPoint Reader firmware plus the official CrossPoint Calibre plugin to send books over Wi-Fi with "Send to device". Calibre can't output XTC, so use a dedicated converter if you want XTC files.

Calibre is the free, open-source ebook manager most serious readers already use. It doesn't know about Xteink readers out of the box, but the CrossPoint community has filled the gap. Here's how to set up each workflow, from the simplest to fully wireless.

What can Calibre do for an Xteink owner?

Three ways to get books from Calibre onto an Xteink

MethodFirmwareSetupBest for
Export to microSDAnyNoneEveryone. Simple and reliable.
CrossPoint Calibre plugin (wireless)CrossPointInstall plugin onceSending books often without touching the card.
Calibre content server + OPDSCrossPointTurn on the content serverBrowsing your Calibre library from the reader itself.

Method 1: Export from Calibre to the microSD card (any firmware)

This works on stock firmware and every model.

  1. Power off the Xteink, remove the microSD card and connect it to your computer.
  2. In Calibre, select your books, right-click and choose Save to disk. Point it at the card, ideally a /books folder. Make sure EPUB is the saved format.
  3. Eject the card safely, reinsert it and power on.

Calibre doesn't recognise the Xteink as a USB device on its own, which is why you save to the card like a folder. On the X4 Pro, which supports USB transfer, you can save directly to the mounted device instead. More options are in our book transfer guide.

Method 2: Send books wirelessly with the CrossPoint Calibre plugin

CrossPoint Reader is free, open-source replacement firmware for the X3, X4, X4 Classic and X4 Pro. Its README lists a "Calibre wireless connect flow", and the project publishes an official plugin at crosspoint-reader/calibre-plugins.

What the plugin does

It adds your Xteink as a Calibre device. The plugin finds the reader on your local network and sends EPUBs to it over Wi-Fi. If discovery fails, it falls back to CrossPoint's default hotspot address. Recent 0.2.x releases added an optional EPUB optimizer before transfer and marking of books already on the device.

How to install and connect

  1. Install CrossPoint on your Xteink if you haven't. See our CrossPoint install guide.
  2. Download the plugin ZIP from the latest release on the GitHub releases page. Don't unzip it.
  3. In Calibre, open Preferences → Plugins → Load plugin from file, select the ZIP, accept the prompt and restart Calibre.
  4. On the reader, open File Transfer and pick the Calibre wireless option. Labels vary slightly between versions.
  5. Keep both on the same Wi-Fi network. Once Calibre shows the device, select books and click Send to device.

The defaults work for most setups. The plugin settings let you change host, port and upload folder if needed. Step-by-step write-ups from owners, such as this April 2026 guide, match the flow above. If your version differs, the plugin README is the authority.

If Calibre can't find your Xteink

Two plugins, don't mix them up. Besides the official wireless plugin, a community plugin by ChristianVaughn works over USB by detecting the .crosspoint folder CrossPoint creates on the card. The official crosspoint-reader/calibre-plugins project is the one for wireless sending.

Method 3: Browse your Calibre library over OPDS

CrossPoint includes an OPDS browser that saves up to eight catalog servers. Calibre's built-in content server provides an OPDS feed, so you can browse and download books on the reader itself:

  1. In Calibre, click Connect/share → Start Content server, and note the computer's IP address and port.
  2. In CrossPoint's OPDS settings, add a server at http://<computer-ip>:<port>/opds.
  3. Browse the catalog on the reader and download books directly.

How to convert MOBI, AZW3 and other formats to EPUB in Calibre

The Xteink reads EPUB and TXT, not Kindle formats. For DRM-free files:

  1. Add the book to Calibre (drag and drop).
  2. Select it and click Convert books.
  3. Set Output format to EPUB and click OK.
  4. Send or save the new EPUB to your Xteink.

Calibre can't convert DRM-protected books, such as most Kindle store purchases. Our Kindle and Libby guide covers the legitimate options for those.

Tidy EPUBs for a small screen

Publisher styles meant for big screens can look cramped on a 4-inch display. In Calibre's conversion settings, the Look & feel section can override font sizes and remove fixed margins. CrossPoint's plugin also offers an EPUB optimizer during transfer.

Good habits for an Xteink library in Calibre

Can Calibre convert EPUB to XTC?

No. Calibre has no XTC or XTCH output. A popular workflow is to use Calibre for organising and EPUB conversion, then a dedicated tool for the final step:

  1. Clean up the book and convert it to EPUB in Calibre.
  2. Convert the EPUB to XTC (1-bit) or XTCH (2-bit grayscale) with your chosen font, margins, spacing and orientation.
  3. Copy the XTC files to the card, or upload them with CrossPoint's browser transfer.

Why bother? XTC pages are laid out on your computer, so they look exactly as you previewed, with any font, even on stock firmware where Calibre's wireless route isn't available. The trade-off is that you can't change font size on the device. Read EPUB vs XTC to decide, and How to Convert EPUB to XTC for the steps.

FAQ

Does Calibre support the Xteink?

Not out of the box. Use Calibre to manage and convert, then copy EPUBs to the card. For direct sending, install CrossPoint and the official CrossPoint Calibre plugin.

What is the CrossPoint Calibre plugin?

An official Calibre device plugin from crosspoint-reader/calibre-plugins. It finds your reader on Wi-Fi and lets "Send to device" work like it does with a Kindle or Kobo.

Do I need CrossPoint firmware to use Calibre wirelessly?

Yes. On stock firmware, save books to the microSD card or use Xteink's XT-Cloud app.

Can Calibre convert MOBI or AZW3 to EPUB for Xteink?

Yes, for DRM-free files. Use Convert books with EPUB as the output. Calibre can't convert DRM-protected books.

Can Calibre convert EPUB to XTC?

No. Make a clean EPUB in Calibre, then convert it to XTC or XTCH with a dedicated converter.

Finish your Calibre workflow with XTC

Turn your Calibre EPUBs into perfectly typeset XTC or XTCH files for the X4 family and X3. Batch, offline, one-time $9.99.

Get EPUB to XTC Converter