Xteink X3 Guide: Specs, Reviews, Books & CrossPoint
Short answer
The Xteink X3 is the smallest reader in Xteink's lineup. It has a 3.7-inch, 528×792 E Ink screen (about 257 PPI, the sharpest Xteink), weighs about 58 g and attaches magnetically to the back of a phone. It has physical buttons only, with no front light or touchscreen, and charges through pogo pins. It reads DRM-free EPUB, TXT and XTC/XTCH files. The price is $69, and it was cut to $55 in Xteink's November 2026 Black Friday early-access sale.
Xteink now sells three readers: the X4 Classic, the front-lit X4 Pro and the X3. The X3 is the one that turns heads: it's small enough to live on the back of your phone, so you read a page instead of scrolling. This guide covers its specs, how it compares with the X4 models, getting books on, firmware and the settings that make text look best on a 3.7-inch screen.
Xteink X3 specs
| Spec | Xteink X3 |
|---|---|
| Screen | 3.7-inch E Ink, 528×792 (~257 PPI calculated; Six Colors quotes 259) |
| Front light / touch | No / No |
| Controls | Physical page buttons, plus tilt-to-turn using a motion sensor |
| Extras | NFC (for shortcuts, not file transfer), magnetic back |
| Weight | ≈58 g |
| Battery | 650 mAh per Xteink's listing (one review reported 350 mAh) |
| Storage | microSD included, up to 256 GB |
| Charging | Magnetic pogo pins (same adapter as the X4 Classic and X4 Pro) |
| Book transfer | Xteink app, microSD, Wi-Fi hotspot upload |
| Chip | ESP32-C3 (same family as the original X4) |
| Price | $69; $55 in the Black Friday early-access sale (Nov 13–15, 2026) |
What reviewers say about the X3
Six Colors found it "easy to love", with a sharp screen and weeks of battery life. It called the proprietary pogo cable "a bummer" and the magnet a little weak, and said CrossPoint firmware made it "actually fun to use". The eBook Reader was harsher about the stock software, which froze and repeated lines in their testing. They rated the X3 highly once CrossPoint was installed and saw it as an excellent second reader. Our Xteink review roundup covers all three models.
Xteink X3 vs X4: which is better?
| X3 | X4 Classic | X4 Pro | |
|---|---|---|---|
| Screen | 3.7", 528×792 | 4.3", 480×800 | 4.3", 480×800 |
| Sharpness | ~257 PPI | ~217 PPI | ~217 PPI |
| Front light | No | No | Yes |
| Weight | ≈58 g | ≈68 g | ≈72 g |
| Price (Nov 2026) | $69 | $79 | $99 |
The X3 is sharper and smaller. The X4 models fit more words on each page, so you turn pages less and can use a bigger font. Pick the X3 if portability is the point, for example as a phone-back reader or a second device. Pick an X4 if it will be your main reader, and the X4 Pro if you read in the dark. The full comparison is in Xteink X3 vs X4 Classic vs X4 Pro.
How to attach the X3 to your phone
The X3 has magnets in its back. It snaps onto iPhones with MagSafe-style magnets and onto magnetic phone cases. For phones without magnets, Xteink includes adhesive metal rings you stick to your phone or case. Reviewers note the hold is fine on a desk but not strong enough to trust in a tight pocket. A magnetic case adds protection; see Xteink cases and accessories.
How to get books on the Xteink X3
- microSD: copy EPUB, TXT or XTC files from your computer to the card.
- XTEINK app: pair the reader with the official app and send files from your phone.
- Wi-Fi hotspot: start the hotspot from the Sync menu, then upload from a browser at the address shown on screen.
See How to get books on your Xteink for step-by-step instructions and free book sources.
CrossPoint firmware on the X3
The X3 is fully supported by CrossPoint Reader, the free open-source firmware most reviewers recommend. As of v2.0.0 (November 2026) it shares a build with the original X4. You can flash it from the web flasher at crosspointreader.com in Chrome or Edge. Community guides also describe an SD-card method: put update.bin on the card, then hold Power plus the top-left button. CrossPoint brings a better EPUB renderer, custom fonts, sleep screens, Wi-Fi upload and KOReader sync.
Use the X3/X4 build only. The X3 uses an ESP32-C3 chip. Never flash the X4 Classic or X4 Pro image, which is built for the ESP32-S3.
Best settings for the X3's small screen
- Use a medium-weight font. Thin fonts look faint at 3.7 inches. Literata, Bookerly-style serifs or a semi-bold sans read better.
- Keep margins tight. Every millimetre counts on a small page. Around 10–16 px per side is plenty.
- Turn hyphenation on. Narrow lines without it leave big gaps in justified text.
- Try landscape for comics and wide tables.
To get precise control over all of this, convert books to XTC with our EPUB to XTC Converter. It has a dedicated X3 preset (528×792), so pages use the full screen instead of being a scaled-down X4 file. Our X3 converter settings guide lists recommended values. For wallpapers, the free sleep screen maker exports 528×792 BMPs.
FAQ
How big is the Xteink X3 screen?
3.7 inches diagonally at 528×792 pixels, about 257 pixels per inch. That makes it the smallest and sharpest screen in Xteink's lineup.
Does the Xteink X3 have a backlight?
No. The X3 has no front light or touchscreen. The X4 Pro is the only current Xteink with a light.
Is the Xteink X3 better than the X4?
It is sharper and smaller, while the X4 Classic and X4 Pro fit more text per page on their 4.3-inch screens. The X3 suits a phone-back or second reader; an X4 suits a main reader.
Can the Xteink X3 run CrossPoint?
Yes. CrossPoint Reader supports the X3 using the same build as the original X4 (ESP32-C3). Flash it from crosspointreader.com in Chrome or Edge.
How does the Xteink X3 charge?
Through magnetic pogo pins on the back, using Xteink's adapter and a USB-C cable. It has no USB-C port of its own. The X4 Classic and X4 Pro use the same adapter.
What size are Xteink X3 wallpapers?
528×792 pixels in portrait. Save sleep screens as uncompressed BMP files for the best compatibility.
Pages made for the X3's 528×792 screen
Batch convert EPUB to XTC or XTCH with a true X3 preset, your own fonts and a live e-ink preview. Offline, one-time $9.99.
Get EPUB to XTC Converter